EasyManuals Logo

Pilz PDP67 F 4 code User Manual

Pilz PDP67 F 4 code
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background image
Safety
Operating Manual PDP67 F 4 code
1001531-EN-06
9
3 Safety
3.1 Intended use
Decentralised passive distributor for use in rugged industrial environments up to protection
type IP67 for connecting PSENcode, PSENslock and PSENini sensors to a Pilz control sys-
tem.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the product
} Use of the product outside the areas described in this manual
} Use of the product outside the technical details (see Technical details).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
3.2 Safety regulations
3.2.1 Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current pro-
fessional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company’s responsibility only to employ personnel who:
} Are familiar with the basic regulations concerning health and safety / accident preven-
tion
} Have read and understood the information provided in this description under "Safety"
} And have a good knowledge of the generic and specialist standards applicable to the
specific application.
3.2.2 Warranty and liability
All claims to warranty and liability will be rendered invalid if
} The product was used contrary to the purpose for which it is intended
} Damage can be attributed to not having followed the guidelines in the manual
} Operating personnel are not suitably qualified

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pilz PDP67 F 4 code and is the answer not in the manual?

Pilz PDP67 F 4 code Specifications

General IconGeneral
Supply voltage24 V DC
Number of safe inputs4
Protection typeIP67
Connection typeM12 connector
Category4
Operating voltage24 V DC
Housing materialPlastic
Protection classIP67
TypePDP67 F 4 code
Safety classificationPL e
StandardsEN ISO 13849-1

Related product manuals