PNOZ XV3.1
Operating Manual PNOZ XV3.1
20515-EN-08
| 15
Faults – Interference
} Earth fault: The supply voltage fails and the safety contacts open. Once the cause of the
respective fault has been rectified and the supply voltage is switched off for approx.
1minute, the unit is ready for operation again.
} Contact malfunctions: If the contacts have welded, reactivation will not be possible after
the input circuit has opened.
} LED "POWER" does not light: Short circuit or no supply voltage.
} In the case of an error, the delay-on de-energisation contacts may open before the delay
time has elapsed.
Dimensions in mm
121 (4.76")
75 (2.95")
87 (3.42")
90 (3.54")
To Next Page
Loading...
Need help?
General
