Pilz PSEN sl-1.0p 1.1 - Page 36

PSEN sl-1.0p 1.1/1.1 VA
Operating Manual PSEN sl-1.0p 1.1/1.1 VA
1003821-EN-12
36
Environmental data
Protection type
Housing IP67
Mechanical data
Holding force FZh in accordance with ISO 14119 1000 N
Magnetic holding force on 1.000 N
Magnetic holding force off 30 N
Max. vertical offset 5 mm
Max. lateral offset 3 mm
Max. angular offset 2,5 deg
Actuator 1 PSEN sl-1.0 VA
Operating distances
Assured operating distance Sao 1 mm
Typical operating distance So 2 mm
Assured release distance Sar 8 mm
Repetition accuracy switching distances 40 %
Typ. Hysteresis 0,7 mm
Min. distance between safety switches 30 mm
Sensor flush installation in accordance with EN
60947-5-2
Yes, follow installation guidelines
Connection type M12, 8-pin male connector
Cable LiYY 8 x 0.25 mm2
Material
Top PBT
Anchor plate Nickel-plated steel
Base plate Stainless steel 1.4301
Actuator Stainless steel 1.4301
Max. torque setting for fixing screws 3 Nm
Dimensions
Height 172 mm
Width 45 mm
Depth 44 mm
Actuator dimensions
Height 188 mm
Width 52 mm
Depth 22 mm
Weight of safety switch 1.470 g
Weight of actuator 1.080 g
Weight 2.550 g
Where standards are undated, the 2015-04 latest editions shall apply.