Pilz PSS Series Installation Manual

Contents
2 Installation Manual: PSS 3056 Series
Connecting the Inputs and Outputs 5-1
Configuration of the screw terminals and connector
description 5-1
Notes on wiring 5-5
On-board digital inputs 5-6
Configuration of the standard PSS 3056 5-7
Example: Single-channel, failsafe input device, unchecked 5-8
Example: Dual-channel input devices, unchecked 5-10
Example: Single-channel, failsafe input device, with test pulse 5-12
Example: Dual-channel, failsafe input device, with test pulse 5-14
On-board single-pole 2 A outputs/test pulses 5-16
Configuration of the standard PSS 3056 5-17
On-board dual-pole 2 A outputs 5-18
Configuration of the standard PSS 3056 5-19
Interfaces 6-1
PG programming interface 6-1
RS 232 user interface 6-1
PSS SB 3056: SafetyBUS p interface 6-2
Appendix 7-1
Changes to the Installation Manual 7-1
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Pilz PSS Series Specifications

General

Category	Safety Equipment
Manufacturer	Pilz
Safety Standards	EN ISO 13849-1, IEC 61508, IEC 62061
Series	PSS
Safety Integrity Level	SIL 3
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Operating Voltage	24 V DC
Operating Temperature	0°C to +55°C (typical), others depending on model
Storage Temperature	-20°C to +70°C (typical), others depending on model
Protection Class	IP20
Application	Industrial safety applications