15
DAB radio mode
DAB radio mode receives DAB/DAB+ digital radio and displays information about
the station, stream and track playing.
To enter DAB mode, press SOURCE > turn SELECT control until the display
shows DAB radio. Press SELECT to select the mode.
Scan for stations
The first time you select DAB radio mode, or if the station list is empty,
Supersound 101 automatically performs a full scan to see what stations are
available. You may also need to start a scan manually to update the list of
stations for one of the following reasons:
Available stations change from time to time.
If reception was not good for the original scan (for example the antenna was not
up), this may result in an empty or incomplete list of available stations.
If you have poor reception of some stations (burbling), you may wish to list only
stations with good signal strength.
To start a scan manually, select MENU > Scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but unavailable, select MENU > Prune invalid.
Selecting stations
To listen to or change a station, press BACK (or 9 or :) > turn SELECT control
to view a list of stations and press SELECT to select. Once selected, the station
plays and the screen shows information about the station, track or show as
broadcast.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label
Segment) information broadcast by the station giving real-time information such
as program name, track title and contact details. Stereo broadcasts are indicated
with an icon at the top of the screen. To view further information, press INFO.
Each time you press INFO, another set of information is displayed, cycling
through DLS text, program type, ensemble name/frequency, signal strength/error
rate, bit rate/codec/channels and today’s date.
To Next Page
Loading...
