20
Software upgrades and factory reset
Software upgrade
From time to time, Supersound 101 may make software upgrades available with
bug Fixes and/or additional features. You can either check manually, or set
Supersound 101 to check periodically automatically (this is the default). If
Supersound 101 detects that newer software is available, it asks if you want to
go ahead with an update.
If you agree, the new software is then downloaded and installed. After a software
upgrade, all user settings are maintained.
CAUTION: Before starting a software upgrade, ensure that Supersound 101 is
plugged into a stable mains power connection. Disconnecting power during a
software update may permanently damage the unit.
To turn automatic checking on or off, press MENU > System settings >
Software update > Auto-check setting.
Factory reset
A factory reset resets all user settings to default values, so time/date, network
configuration and presets are lost. However, the radio’s current software version
is maintained.
To perform a factory reset, press MENU > System settings > Factory reset
Proceed > Yes.
To Next Page
Loading...
