EasyManua.ls Logo

Pinell SUPERSOUND 101 - Using the Sleep Timer

Pinell SUPERSOUND 101
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
At the set time, the alarm will sound. To temporarily silence it, press SELECT.
Pressing SELECT repeatedly cycles through the available snooze periods: 5
Mins, 10 Mins, 15 Mins, 30 Mins. The radio returns to standby for the set period,
with the silenced alarm icon flashing and a countdown of the remaining snooze
period. After the set snooze time the alarm will sound again.
Note: During a snooze period, to change the snooze time, press SELECT to
select a new snooze time.
Any remaining snooze time is reset to the selected time period.
To cancel a sounding alarm, or an alarm in snooze, press SELECT to turn off
alarm.
Sleep
To set the sleep timer, select MENU > System settings > Sleep then choose
from Sleep OFF, 15 MINS, 30 MINS, 45 MINS or 60 MINS.
Stop when the required time is displayed, after a brief moment the screen returns
to the screen being used before the sleep function was selected. On the Now
Playing screens the remaining sleep time is displayed at the bottom of the
screen.
To cancel a sleep time, select Sleep OFF from the sleep options using either of
the above methods.
Note: A sleep time is automatically cancelled if Supersound 101 is put into
Standby.

Related product manuals