EasyManua.ls Logo

Pioneer AVIC-D2 - Using the AV Source (Pioneer AV Equipment) (Chapter 7); Multi-CD Player

Pioneer AVIC-D2
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
Chapter 6 Using the AV Source (Built-in CD Drive and Radio)AV
Storing and recalling broadcast
frequencies
If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily store
up to six broadcast frequencies for later recall
with the touch of a key.
1 When you find a frequency that you want
to store in memory keep touching a preset
tuning key P1 — P6 until the preset num-
ber (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
2 The next time you touch the same preset
tuning key P1 — P6 the radio station fre-
quency is recalled from memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
Up to 18 FM stations, 6 for each of the
three FM bands, and 6 AM stations can be
stored in memory.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under preset tuning keys P1P6 and once
stored there you can tune in to those frequencies
with the touch of a key.
1 Touch “BSM” in the FUNCTION menu.
2 Touch “START” to turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will
be stored under preset tuning keys P1P6
in order of their signal strength. When fin-
ished, BSM stops flashing.
To cancel the storage process, touch
STOP”.
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using P1P6.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Touch “LOCAL” in the FUNCTION menu.
2 Touch “ON” to turn local seek tuning on.
To turn local seek tuning off, touch “OFF”.
3 Touch or to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 — 2 — 3 — 4
AM: 1 — 2
The FM “4” (AM “2”) setting allows reception
of only the strongest stations, while lower set-
tings let you receive progressively weaker sta-
tions.
Preset tuning keys (P1 — P6)
RADIO

Table of Contents