EasyManua.ls Logo

Pioneer PDP-615EX

Pioneer PDP-615EX
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
30
En
Specifications
Specifications
Screen Size 1351(H)760(V) mm
53.2"(H)29.9"(V) inches
diagonal 61"
Aspect Ratio 16 : 9
Resolution 1365(H)768(V) pixels
Signals
Synchronization Range Horizontal : 15.5 to 110 kHz
(automatic : step scan)
Vertical : 50.0 to 120 Hz
(automatic : step scan)
Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*
1
, DVD*
1
, DTV*
1
Input Terminals
PC
Visual 1 (Analog) mini D-sub 15-pin1
Visual 2 (Analog) BNC (R, G, B, H/CS, V)1*
2
Video
Visual 1 BNC1
Visual 2 RCA-pin1
Visual 3 S-Video:DIN 4-pin1
COMPONENT
Visual 1 RCA-pin (Y, PB[CB], PR[CR])1*
1
Visual 2 BNC (Y, PB[CB], PR[CR])1*
1,
*
2
HDMI HDMI connector*
3
Audio Stereo RCA3 (Selectable)
RS-232C D-sub 9-pin1
Sound output 9W+9W at 6 ohm
Power Supply AC220-240V 50/60Hz
Current Rating 3.7A (maximum)
Power Consumption 540W (typical) (standby 1.8W)
Dimensions 1502 (W)912 (H)126(D) mm
59.1 (W)35.9 (H)5.0 (D) inches
Weight 68.0 kg / 149.9 lbs (without stand)
Environmental Considerations
Operating Temperature 0°C to 40°C / 32°F to 104°F
Other Features Motion compensated 3D Scan Converter (NTSC,
PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3
pull down Converter (NTSC, 480I, 525I, 1035I,
1080I (60Hz)), 2-2 pull down Converter (PAL,
576I, 625I, NTSC, 480I, 525I), Digital Zoom
Function (100-900% Selectable), Self Diagnosis,
Image Burn reduction tools (ABL, INVERSE,
WHITE, ORBITER, SCREEN WIPER), Color
Temperature select (high/middle/middle low/low,
user has 4 memories), Auto Picture, Input Skip,
Color MGT, Low Tone (3 mode), Gamma
Correction (4 mode), Plug and play (DDC1,
DDC2b, HDMI:E-DDC), Split screen operations
The features and specifications may be subject to change without
notice.
*
1
COMPONENT input signals supported on this system
480P (60 Hz) 480I (60 Hz) 525P (60 Hz)
525I (60 Hz) 576P (50Hz) 576I (50Hz)
625P (50Hz) 625I (50Hz) 720P (60 Hz)
1035I (60 Hz) 1080I (50 Hz) 1080I (60 Hz)
*
2
The 5-BNC connectors are used as PC2 and COMPONENT2 input.
Select one of them under BNC INPUT.
*
3
HDMI input signals supported on this system.
Supported Signals
640480P @ 60Hz 19201080I @ 50Hz
1280720P @ 60Hz 720576P @ 50Hz
19201080I @ 60Hz 1440 (720)576P @ 50Hz
720480P @ 60Hz 1280720P @ 50Hz
1440 (720)480I @ 60Hz
Note: In some cases a signal on the plasma monitor may not be displayed
properly. The problem may be an inconsistency with standards from
the source equipment (DVD, Set-top box, etc...). If you do experience
such a problem please contact your dealer and also the manufacturer of
the source equipment.

Table of Contents

Related product manuals