Pioneer SC-LX83 - Connecting the RF Adapter (SC-LX83 Only)

Connecting your equipment
03
20
En
Note
• The input functions below are assigned by default to
the receiver’s different input terminals. Refer to The
Input Setup menu on page 45 to change the
assignments if other connections are used.
• SC-LX73 only: The CU-RF100 omni-directional remote
control (separately sold) can be connected to the RS-
232C and EXTENSION terminals. Using the CU-
RF100 lets you display the receiver’s display
information on the remote control display in your
hands and operate it without worrying about
obstacles or the direction in which the remote control
is pointing.
CAUTION
•Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
Connecting the RF adapter
(SC-LX83 only)
Two-way communications between the receiver and
remote control are possible by connecting the included
RF adapter to the RS-232C and CU-RF100 terminals on
the receiver. For the features of two-way communications
and detailed usage instructions, see Using the RF
communications function on page 86.
Input function
Input Terminals
Digital HDMI Component
DVD COAX-1 IN 1
BD (BD)
TV/SAT OPT-1
DVR/BDR OPT-2 IN 2
VIDEO OPT-3 IN 3
HDMI 1
(HDMI-1)
HDMI 2 (HDMI-2)
HDMI 3
(HDMI-3)
HDMI 4 (HDMI-4)
HDMI 5
(front panel)
(
HDMI-5)
CD COAX-2
CD-R/TAPE
COAX-3
a
a.SC-LX83 only.
RS-232C
EXTENSION
(
OUTPUT 5 V
150 mA MAX
)
CONTROL
IN
OUT
RS-232C
MONITOR
OUT
ZONE 2 OUT
Y
ANTENNA
FM UNBAL 75 AM LOOP
P R P B
CU-RF100
IR 12 V
TRIGGER
IN
IN
OUT
1
2
1
2
(OUTPUT
12 V
TOTAL
150 mA MAX)
(
OUTPUT 5 V
150 mA MAX
)
RF adapter
SC-LX83_73_DLPW.book 20 ページ ２０１０年５月１９日 水曜日 午後２時７分