Basic Setup
04
45
En
The Input Setup menu
You only need to make settings in the Input Setup menu
if you didn’t hook up your digital equipment according to
the default settings (see Input function default and
possible settings on page 45). In this case, you need to
tell the receiver what equipment is hooked up to which
terminal so the buttons on the remote control
correspond to the components you’ve connected.
1 Set the remote control to the receiver operation
mode, then press
HOME MENU
.
A Graphical User Interface (GUI) screen appears on your
TV.
Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
2 Select ‘
System Setup
’ from the
Home Menu
.
3 Select ‘
Input Setup
’ from the
System Setup
menu.
4 Select the input function that you want to set up.
The default names correspond with the names next to the
terminals on the rear panel (such as DVD or VIDEO)
which, in turn, correspond with the names on the remote
control.
5 Select the input(s) to which you’ve connected your
component.
For example, if your DVD player only has an optical
output, you will need to change the DVD input function’s
Digital In setting from COAX-1 (default) to the optical
input you’ve connected it to. The numbering (OPT-1 to 3)
corresponds with the numbers beside the inputs on the
back of the receiver.
6 When you’re finished, proceed to the settings for
other inputs.
There are optional settings in addition to the assignment
of the input jacks:
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT. (DVD
and other inputs can be still be selected directly with
the input function buttons.)
• 12V Trigger1/2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger on page 40), select
MAIN, ZONE 2, ZONE 3 or OFF for the corresponding
trigger setting to switch it on automatically along
with the (main or sub) zone specified.
1
7 When you’re finished, press
RETURN
.
You will return to the System Setup menu.
Input function default and possible settings
The terminals on the receiver generally correspond to the
name of one of the input functions. If you have connected
components to this receiver differently from (or in
addition to) the defaults below, see The Input Setup menu
on page 45 to tell the receiver how you’ve connected up.
The dots () indicate possible assignments.
A/V RECEIVER
Exit Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Network Setup
e. Other Setup
4.System Setup 4b.Input Setup
A/V RECEIVER
Exit Finish
Input : DVD
Input Name : Rename
Digital In : COAX-1
HDMI Input :
---
Input Skip : OFF
Component In : Comp-1
12V Trigger1 : OFF
12V Trigger2 : OFF
1 Devices connected to 12 volt tr iggers can be associated with HDMI OUT switching. For details, see HDMI Setup on page 68.
Input
function
Input Terminals
Digital HDMI
Component
DVD COAX-1
a
a.With Control with HDMI set to ON, assignments cannot be made
(see Control with HDMI function on page 67).
IN 1
BD (BD)
TV/SAT OPT-1
a
DVR/BDR OPT-2
a
IN 2
VIDEO OPT-3
a
IN 3
HDMI 1
(HDMI-1)
HDMI 2 (HDMI-2)
HDMI 3
(HDMI-3)
HDMI 4
(HDMI-4)
HDMI 5
(front panel)
(HDMI-5)
HOME
MEDIA
GALLERY
b
b.SC-LX83 only.
INTERNET
RADIO
c
c.SC-LX73 only.
iPod/USB
CD COAX-2
CD-R/TAPE
COAX-3
d
d.SC-LX83 only. (assignment possible) for the SC-LX73.
TUNER
ADAPTER
PORT
PHONO
MULTI CH IN
a
SC-LX83_73_DLPW.book 45 ページ ２０１０年５月１９日 水曜日 午後２時７分
To Next Page
Loading...
