7
En
Flow of settings on the receiver
The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used easily
after following the procedure below to make the connections and settings.
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
1 Before you start
• Checking what’s in the box (page 9)
•Loading the batteries (page 9)
2
Determining the speakers’ application (page
21)
• 9.1 channel surround system (Front height)
• 9.1 channel surround system (Front wide)
• 7.1 channel surround system & Speaker B
connection
• 5.1 channel surround system & Front Bi-amping
connection (High quality surround)
•5.1 channel surround system & ZONE 2 connection
(Multi Zone)
3 Connecting the speakers
• Placing the speakers (page 22)
• Connecting the speakers (page 23)
• Installing your speaker system (page 24)
•Bi-amping your speakers (page 25)
4 Connecting the components
• About the audio connection (page 26)
• About the video converter (page 26)
•Connecting your TV and playback components
(page 28)
• Connecting AM/FM antennas (page 35)
• Plugging in the receiver (page 41)
5Power On
6 Changing the OSD display language (OSD
Language) (page 42)
7 MCACC speaker settings
• Automatically conducting optimum sound tuning
(Full Auto MCACC) (page 43)
8 The Input Setup menu (page 45)
(When using connections other than the
recommended connections)
9 Basic playback (page 46)
10 Switching the HDMI output (page 76)
11 Adjusting the sound and picture quality as desired
• Using the various listening modes (page 55)
•Better sound using Phase Control (page 58)
•Better sound using Phase Control and Full Band
Phase Control (SC-LX83 only) (page 59)
•Measuring the all EQ type (SYMMETRY/ALL CH
ADJ/FRONT ALIGN) (page 99)
• Changing the channel level while listening (Tip on
page 111)
• Switching on/off the Acoustic Calibration EQ,
Sound retriever or Dialog Enhancement (page 71)
• Setting the PQLS function (page 70)
• Setting the Audio options (Tone, Loudness or
Sound delay, etc.) (page 71)
• Setting the Video options (page 73)
12 Other optional adjustments and settings
•Control with HDMI function (page 67)
• The Advanced MCACC menu (page 99)
•The System Setup and Other Setup menus (page
109)
13 Making maximum use of the remote control
SC-LX83:
•Operating multiple receivers (page 79)
• Setting the remote to control other components
(page 79)
• Using the RF communications function (page 86)
SC-LX73:
•Operating multiple receivers (page 91)
• Setting the remote to control other components
(page 92)
SC-LX83_73_DLPW.book 7 ページ ２０１０年５月１９日 水曜日 午後２時７分
To Next Page
Loading...
Need help?
General
