Pioneer XR-P310 User Manual

ret built
teetrcat
intormar
the mast
wader
ounenng
ge une,
CODE
[FOR U.S. MODEL]
CAUTION
@
Use
of
controls
or
adjustments
or
performance
of
procedures
other
than
those
specified
herein
may
result
in
hazardous radiation exposure.
@ The use of optical instruments with this product will increase eye hazard.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging
the cord and never touch the power cord when your hands are wet as.
this could cause a short circuit or electric shock. Do not place the unit,
a piece of furniture, etc., on the power cord, or pinch the cord. Never
make a knot In the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped on. A
darnaged power cord can cause fire or give you an electrical shock,
Check the power cord once in a while. When you find it damaged, ask
your nearest PIONEER authorized service cemer or your dealer for a
replacement,
LINE
VOLTAGE
SELECTOR
SWITCH
Only multi-voltage models are provided with this
switch.
U.S.,
Canadian,
U.K.,
Australian
and
European
models
are
not
provided
with
this
switch.
Mains voltages in Saudi Arabia are 127V and 220V
only.
Never
use
this
model
at
the
110V
setting
in
Saudi Arabia.
Before your made! is shipped from the factory, this switch is
setto the power requirements of the destination; nevertheless,
you
should
check
that
it
is
set
properly
before
plugging
the
power cord into the wail outlet.
1. Disconnect the power cord,
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage
selectors and adjust so that the tip of the arrow points to the
voltage value of your area,
VOLTAGE SELECTOR
nov,
3
<ARB1293>
En

Pioneer XR-P310 Specifications

General

Brand	Pioneer
Model	XR-P310
Category	Receiver
Language	English