Page 23 of 69 USER MANUAL
4.1 Installation Instructions
Read carefully the following instructions. Nonobservance can destroy the device.
Immediately upon receipt of the
H1
system, the user should:
Inspect the shipping carton in the presence of delivery courier. If there is any
damage to the outer package, request the courier to sign a Notice of Damage
receipt.
Save all cartons for inspection. Particularly, keep the shipping carton during laser
warranty period for possible service/upgrade returns.
Inspect thoroughly the carrying case and components inside for damage and
missing items.
Unpack all components carefully and verify the presence of all components on
the packing slip.
Notify
Wuhan Pioon Technology Co.,Ltd.
immediately if there are any missing
items.
Note on acclimatization
After installation and, also, every time when the temperature difference
between locations of the unit is more than 5°C, the unit must be acclimatized
before use, e.g. laser operation:
for at least two hours in case of a temperature difference up to 10°C
for at least four hours in case of a temperature difference up to 15°C
for at least 8 hours in case of a temperature difference up to 20°C
Note
For the unit to be effectively air-cooled, a minimum distance of 200 mm
must be maintained to any objects in its arounding.
To Next Page
Loading...