Pioon H1 - General System Information; User Guide and Safety Symbols; System Introduction

USER MANUAL Page
4
of
69
1 GENERAL
1.1 User Guide
Requirement
Read these instructions before the initial startup to prevent misuse and damage.
1.1.1 Symbols
See the section Warning and Informational Signs
Important information for users and technicians
1.1.2 Target group
This document is for dentists and office personnel.
1.2 Introduction
H1 , the DIODE LASER DENTAL SYSTEM, from Wuhan PIOON Technology Co., Ltd.
(PIOON) assembles the latest semiconductor laser technology available for soft
tissue modification and preventative care.
The Medical Diode Laser uses GaAlAs diode lasers as energy source. The laser
energy is delivered to the surgical area by an optical path transmission system
consisting of a flexible fiber connecting the laser source. The wavelength produced
by the diode is approximately 450 to 1470 nanometers (nm) . The light is an invisible
non-ionizing thermal radiation that does not create changes in cellular DNA.H1
Medical Diode Laser has continuous mode and pulse mode, and the maximum
output power is 10W. The H1 unit is an air-cooled device.