Page 61 of 69 USER MANUAL
1) Protect the fiber of handpiece from rigid bending, so as not to break the fiber.
2) After removing the handpiece, immediately cover the dust cap to prevent dust
pollution, dust cap must be cleaned with alcohol before use.
3) Do not use a hard or sharp things scratch the touch screen, can not use chemical
reagents rub the touch screen. Please wipe carefully with lens paper.
4) Clean the surface of the device regularly to prevent the accumulation of dust. We
recommend the use of CaviWipes™, but should avoid splashing liquid into the interior
of the device.
5) The vibration or collision should be tried to avoid in the process of moving the
device.
6) Please contact the company or the designated dealer to repair and maintain the
device when the power is reduced. Do not disassemble the device without guidance
to avoid the damage on the human body and device that caused by the possible
harmful laser radiation.
7) It is advisable to carry out a routine inspection and maintenance and power
calibration every year under the guidance and operation of our authorized personnel
or designated dealers to avoid possible damage to the device and harmful laser
radiation on personnel.
WARNING
This product is a Class 4 laser product. During use and maintenance, do not
look into the laser or direct beam to avoid irreversible damage to the eyes. It
is strongly recommended that users carefully read the instructions to avoid
the damage on the human body and device that caused by the possible
harmful laser radiation.
To Next Page
Loading...