Pit Boss PB4GRT - Installing the Cooking Components; Inserting the Battery

13
19.    
Parts Required:
1 x Warming Rack (A)
2 x Cooking Grate (B)
4 x Flame Tamer (C)
Installation:
• Install the 4 flame tamers (C) into the notches directly over the main
burners of the grill head (K).
• Place the cooking grates (B) onto the ledges above the flame tamers.
• Insert the legs of the warming rack (A) into the 4 holes in top of the
grill head (K) side panels. Note the illustration.
20.   
Parts Required:
1 x AA Battery (GG)
Installation:
• Unscrew the electronic igniter battery cap from the front left side of
the control panel. Insert the AA battery (GG) with the positive terminal
facing outward.
• Reinstall the electronic igniter battery cap.
IMPORTANT – SPARK CHECK
Test the ignition system for sparks before first use. With the gas
OFF, push the electrical igniter. This will help assure a trouble-free
ignition when you turn on the gas.
19
20