2.4 SHORTENING FILTER PROCEDURES
This section describes the procedures used to filter fryers using the solo filter unit. Figure 2-1 shows
the locations of the components used in the filterproc:ess. The filter accessories and tools you should
have to perform normal filtering operations are described on page 2-5. Frequent filtering of your
shortening will prolong the shortening's usable life. Daily shortening filtering is strongly
recommended .
Return
Valve
Drain Valve
Handle
NOTE
See Maintenance Section for Filter
Operational Information.
CLOSEDVALVE
(Handle Across Body)
Figure 2-1 Fryer mustrating Filter Components
Hush Hose
Valve
optional)
Valve Handle
Valve Body
VALVE OPEN
(Handle Inllne With Body)
2-4
To Next Page
Loading...
