Pitco L22-355 User Manual

English
L22-355 Rev 1 (3/7)
This control was developed specifically for Pitco fryer products. It utilizes the latest in
microprocessor technology and is completely solid state. This control offers the latest cooking
technology, including temperature and time compensation that requires no user adjustments for
consistently cooked product. Other features include, drain valve interlock, faulty probe detection,
selectable melt cycles, beeper volume, and cook temperature. Each product key may be programmed
with cook, shake and hold times to keep pace with changing menus over time.
This manual details the operation and adjustment of the Spin Fryer I12 Cooking Computer control.
The target audience for this text is the Service Technician. This manual reveals all adjustments that
are possible by keyboard entry, including passwords.
IMPORTANT INFORMATION FOR FUTURE REFERENCE
Record the following information from the appliance ID plate
and retain this manual for the life of the equipment:
Model #: __________________________
Serial #: __________________________
Date Purchased: ___________________
Service Manual
for Pitco P/N 60149505 Spin Fryer
I12 Cooking Computer
R
0
9
8
7
6
5
4321L

Pitco L22-355 Specifications

General

Model	L22-355
Heating Method	Gas
Baskets Included	2
Gas Type	Natural Gas or Propane
Construction	Stainless Steel
Type	Gas Fryer
Temperature Range	200°F - 375°F

Summary

Pitco I12 Cooking Computer Service Manual

1 Key Locations and Functions

Appliance Power and Basic Operations

Details how to turn the appliance ON/OFF and initiate/cancel cooking cycles.

Cook Setting Verification and Boil Out Procedures

2 To Enter Programming Level 1 (for the Store Manager)

Setting Cook Temperatures

Guides on how to set the desired cooking temperature for the fryer.

Configuring Product Key Parameters

Instructions for programming cook, shake, hold, and spin times for each product key.

3 To Change Options Level 2 (for the Store Manager)

Display, Password, and Beeper Settings

Covers changing display units, password requirements, and beeper functionality.

Language and Melt Cycle Configuration

Details how to select the display language and configure melt cycle types.

4 To Enter Programming Level 3 (for the Technician)

Temperature Offset and Melt Cycle Timing

Minimum Cycle and Recovery Time Settings

Diagnostic Menu and Ready Level Configuration

Accessing diagnostic functions for inputs/outputs and setting the ready level threshold.

Service Menu Parameters: Range and Instant On

Advanced Service Parameters: Durations

Factory Reset and Network Address Settings

5 Factory Menu Level 4 (for the Technician)

Pitco Collect and Temperature Offset Settings

Melt Cycle and Minimum Cycle Time Settings

Recovery Test, Diagnostic, and Range Settings

Spin Diagnostics Functions

Detailed functions and operations within the spin diagnostic menu.

Test On/Off and Control ID Display