Pitco L22-355 - 2 To Enter Programming Level 1 (for the Store Manager); Setting Cook Temperatures

Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
Page 7 of 28 L22-355 Rev 1
2 To Enter Programming Level 1 (for the Store Manager):
Note: The factory default setting for this control does not require a password to be entered.
However, the operator password requirement and value may be changed in section 3.2.
Entry of a password when NOT required will not interfere with the programming process.
With no cook timers running, displays will show one of the following displays:
;
, or . Press the key.
If display shows:
, a password is required.
Enter password
Level 1 & 2 Password
6864
using the product keys as
a numeric keypad for entry. With correct password entry, display
will show
.
If display shows:
; you do not need
to enter a password.
From the
display, continue with this section or go to section 3, or 4.
2.1 To Set Cook Temperature:
 Press the key once. The display will show [SET xxxF] [TEMP] or [SET xxxC] [TEMP],
where “xxx” is the temperature setting.
 Use the product keys for numeric entry to adjust the current setting. Press the key to
save setting. Display now shows
. To exit here, press again, or
continue.