EasyManua.ls Logo

Pitco SG14C - Oil Temperature

Pitco SG14C
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
WARNING
Installation and all connections must be made according to national and local regulations and codes in force.
NOTICE
Installation should only be performed by a competent Service Technician. The model & serial number, and gas type
& pressure are stamped into the data plate located on the inside panel of the fryer door.
NOTICE
This appliance is intended for professional commercial use only and, as such, should be operated by fully trained
personnel.
NOTICE
It is recommended that this machine be inspected by a Qualified Technician on a yearly basis.
HIGH LIMIT RESET
Fryer is equipped with a high temperature safety shut-off switch, which will stop the heating operation
if shortening temperature exceeds 425
0
F (202
0
C ). If fryer does not heat press reset button, if unit still
does not heat call authorized service agent.
ENGLISH
NOTICE
Counter top must be constructed of a non-combustible material for SG14C
counter top fryer installations.
OIL TEMPERATURE
Keep the oil temperature in the fryer to a maximum of 190°C. Higher temperatures will cause rapid
breakdown of the oil and give you no faster cooking.
At 205°C to 210°C the life of the oil is only one third of its life at 190°C. In addition, increased decompo-
sition causes the oil to smoke badly even if the temperature is lowered to 190°C again.
High temperatures give you no advantage, cost you money and increase the fire danger.
Solstice Series Overall Dimension
Models Dimensions (cm) Gas Connection (cm)
Height Width Length From Floor From Side
SG14 114.9 47.6 97.8 38.2 19.8
SG14R 114.9 47.6 97.8 38.2 19.8
SG14T 114.9 47.6 97.8 38.2 19.8
SG18 114.9 57.8 97.8 38.2 24.9

Related product manuals