AW32914 Rev A 06/2019
5. Pack the device for shipment back
to Pitney Bowes.
Everything you need to return your system is
included in the white box that your replacement
device arrived in.
5a. Place the meter in the plastic bag your new meter arrived in.
5b. Place the device in the white box as shown in the
illustration.
5c. Locate the prepaid Purolator shipping label included
in the shipment of your new meter. Complete required
fields. In the sender/from sections, fill in your phone
number, company name and address. Apply the label
over previous shipping label.
if you require more details instructions, please refer to:
pitneybowes.com/ca/en/returns
The below list of items should not be returned.
Use these items with a replacement meter or
properly discard these electronic items according
to your Municipal/Provincial/Federal codes/regulations.
5d. Retain the customer portion of the prepaid
shipping label for tracking purposes.
5e. Call Purolator at 1-888-744-7123 to retrieve your packages.
Bottom
Top
Device in
plastic bag
Label
USB cable LAN cable
Scale Stacker tray
Power cord
Ink cartridge
4h. If you are using the stacker tray, slide that away from
the device.
4g. Remove the moistener reservoir by removing
three thumbscrews from the bottom of the reservoir.
(hold and remove the reservoir straight in order not to
spill sealing solution.)
Drain the reservoir completely.
Attach the empty reservoir back with the thumbscrews.
Drain resovoir
Thumbscrew
1 2
Moistener
resovoir
To Previous Page
Loading...
