Pixel EM-2 - Help Numbers; Help Number Programming Rules; Programming a Single Telephone Number; Programming Multiple Telephone Numbers

Telephone Line Powered Auto Dialing emFONE
Product Manual
EM-2
Copyright © 2014 Pixel Technologies Pty. Ltd
10
3.3. Help Numbers
There are three individual telephone help numbers that the unit can dial.
3.3.1. Help Number Programming Rules
 Telephone help numbers cannot exceed 16 digits.
 A '#' within the telephone number will be replaced with a 3 second pause when dialing. This
becomes a useful entry when dialing out on a PABX system, giving the system time to establish
an external line before dialing the telephone number.
 The unit will not dial 000 emergency services. (Please contact the manufacturer to enable this
feature).
3.3.2. Programming a Single Telephone Number
To program a single number into all three memory locations enter the following sequence:
#
PIN
9
#
0
TELEPHONE NUMBER
*
3.3.3. Programming Multiple Telephone Numbers
To program three individual telephone help numbers enter the following set of sequences:
LOCATION 1
#
PIN
#
0
TELEPHONE NUMBER
*
LOCATION 2
#
PIN
#
1
TELEPHONE NUMBER
*
LOCATION 3
#
PIN
#
2
TELEPHONE NUMBER
*
To hear an audible playback of each programmed telephone number, enter the following set of
sequences:
3.3.4. Programming for PABX Installation
When connecting to a PABX system and the number the unit is required to dial is not an extension
within the PABX system, but an external number on the PSTN network, then a PABX access code will
need to be entered to access an external PSTN line.
To program a single number into all three memory locations enter the following sequence:
= 3 Second Pause
#
PIN
9
#
0
PABX CODE
#
TELEPHONE NUMBER
*
LOCATION 1
*
0
LOCATION 2
*
1
LOCATION 3
*
2