Planar PS Series User Guide 35
LAN Control
The Planar PS Series supports extending access to the RS232 commands over a
network connection using a virtual COM port (VCOM). The VCOM driver can be found
on http://www.planar.com/support.
Note: RS232 commands over LAN can be achieved by opening a TCP connection to Port 23
to the display. The LAN control functionality is most frequently used by control systems, and
they won’t be able to use the VCOM drivers
Supported Operating Systems
The utility supports the following operating systems:
• Windows 7
• Windows 8 and 8.1
• Windows 10
To Next Page
Loading...
