Planar PS4662T User Manual

Planar PS Series User Guide 61
Troubleshooting
Symptoms, Possible Causes and Solutions
Below are different symptoms that you might encounter as you install your Planar PS
Series display. First look at the different symptoms to see if you can find your issue.
And then look at the possible cause and try the suggested solution(s). If you still are
not able to resolve your issue, please contact Planar’s Technical Support Department.
Symptom: No Image Is Displayed
Solution
Make sure the correct source is selected.
Solution
Make sure the main power switch is turned ON.
Solution
Check that the source equipment is operating correctly.
Solution
Make sure the input signal is compatible with this display.
Symptom: The Image Is Not Centered
Solution
Make sure the input signal is compatible with this display.
Symptom: The Remote Control Doesn’t Work
Solution
Make sure the batteries are new and are installed correctly.
Solution
Make sure the remote control sensor is plugged in correctly.
Solution
Make sure the remote is aimed towards the back of the display, where the sensor is
located.

Planar PS4662T Specifications

General

Brand	Planar
Model	PS4662T
Category	Monitor
Language	English