7
Standard Mode (default)
Switch Mode
Options:
VLAN
Extend
Standard>
<UP>/<Down>: Selec t
<Enter>:Conf irm < Back>: Retur n
Current Sett ing: Standa rd
Power
PoE
100 meters (328 feet)
LCD PoE Switch
PoE
100BASE-TX UTP with PoE
PoE IP Camera
> Standard
VLAN
Extend
> Standard
VLAN
Extend
The VLAN operation mode features the port-based VLAN function that can help to
prevent the IP camera’s multicast or broadcast storm from inuencing each other.
VLAN Isolation Mode
Ports 17~20 for Uplink
Ports 1~16 Access Permitted
LCD PoE Switch
PC
Ports 1 to 16
Access Denied
PoE
PoE
PoE
1000
1000BASE-SX/LX Fiber Optic
1000
100BASE-TX UTP
PoE
100BASE-TX UTP with PoE
IP Camera
IP Camera
IP Camera
NVR
Switch Mode
Options:
VLAN
Extend
Standard>
<UP>/<Down>: Selec t
<Enter>:Conf irm < Back>: Retur n
Current Sett ing: Standa rd
Standard
> VLAN
Extend
Standard
> VLAN
Extend
In the Extend operation mode, the FGSW-2022VHP operates on a per-port basis at
10Mbps duplex operation but can provide PoE power output over a distance of up
to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-
new feature, the FGSW-2022VHP provides an additional solution for 802.3at/bt PoE
distance extension, thus saving the cost of Ethernet cable installation. Its VLAN
isolation function isolates ports so as to prevent broadcast storm and defend DHCP
spoong in the Extend operation mode.
Extend Mode
Power
250 meters (820 feet)
PoE
LCD PoE Switch
PoE
10BASE-T UTP with PoE
PoE IP Camera
Switch Mode
Options:
VLAN
Extend
Standard>
<UP>/<Down>: Selec t
<Enter>:Conf irm < Back>: Retur n
Current Sett ing: Standa rd
Standard
VLAN
> Extend