1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1260PT
22
Chapter 4. Web-based Management
Please take a few minutes to read through this guide to familiarize with the steps required to set up your door
phone. When the device and your computer successfully connect to the network, enter the IP address of the
device. You will see the Webpage management interface login screen. Enter the user name and password
and click the button to enter the settings screen.
Door phone can be configured with your Web browser. Before configuring, please make sure your PC is in
the same IP segment as the door phone.
This chapter provides setup details of the door phone Web-based Interface.
4.1 Status
4.1.1 Basic Menu
Basically the Web menu shows Product Information, Network Information, Network
Connection and Account Registration as shown below.
To Next Page
Loading...
Need help?
General
