1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1260PT
50
Paging Priority Active: The switch of Paging Priority Active; default is
Disable (Enable or Disable).
Priority List To display and configure Multicast Listening Address and Priority Level, which
is the same as 1/2/3/4/5/6/7/8/9/10.
4.5.8 Intercom
To configure Intercom feature parameters, based on address support, see below.
Active To configure Intercom switch, default is disable (Enable or Disable).
Intercom Mute To configure when intercom A calls in, intercom B got mute or not.
4.5.9 Door Lock
To display and configure user sensor and door lock status, door lock control, and auto opening
setting, see below.