1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1260PT
45
Echo Canceller
To Enable or Disable Echo Canceller, Voice Active Detection(VAD) and
Comfort Noise Generator(CNG)
Jitter Buffer To Enable or Disable Jitter Buffer types [Adaptive (default) and Fixed).
If Adaptive is selected, default min. delay is 0ms; default max. delay
is 300ms; and default normal delay is 120ms.
Volume Defaut Mic Volume is 5 (1-10).
Default Speaker Volume is 5 (1-10).
Default Recorder Volume is 2 (1-10).
Default Line Out Volume is 6 (1-10).
Default Key Tone Volume is 5 (1-10).
Default Ringtone Volume is 5 (1-10).
AGC Configuration AGC (Automatic Gain Control) is configured to approach target
threshold, and automatically control the gain.
Tx direction AGC Enable: Default is Enabled (Enabled or Disabled).
Tx Max Gain: Default is 0db (0~30db).
Tx Min Gain: Default is -40db (-40~0db).
Tx Target Level: Default is 120 (0~400).
Rx direction AGC Enable: Default is Enabled (Enabled or Disabled).
Rx direction AGC Enable: Default is 5 (0~30db).
Rx Min Gain : Default is -40db (-40~0db).
Rx Target Level: Default is 120 (0~400).
Handsfree Auto AGC enable: Default is disable (Enabled or
Disabled).
Handsfree Tx Max Gain: Default is 10db (0~30db).
Audio Management
Input Selection: Default Native Mic, (Native Mic, Line Input, Mixing)
Speaker Out: Default is enabled (Enabled or Disabled).
Line out: Default is disabled (Enabled or Disabled).
Recorder Output: Default is disabled (Enabled or Disabled)
To Next Page
Loading...
Need help?
General
