Planet IGS-4215 Series - Configuring Ip Address Via The Console

10
The user can now enter commands to manage the Industrial Managed Switch.
For a detailed description of the commands, please refer to the following
chapters.
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
4.2 ConguringIPAddressviatheConsole
TheIndustrialManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Industrial
ManagedSwitch,pleaseusetheproceduresasfollows:
 Display of current IP address
1.Atthe“IGS-4215-16T2S #” prompt, enter “show ip”.
2. The screen displays the current IP address, subnet mask and gateway as
shown in Figure 4-3.
Figure 4-3: IP Information Screen