64-Channel Windows-based Network Video Recorder with 8-bay Hard Disks
NVR-E6480
59
is selected in the beginning, and you have to select your desired channels.
Add Video Source
There are two ways to pull in video sources:
1. In View area, click on a saved view.
2. From Camera panel, double-click on a camera or drag it to Display area.
Through either way, you may add video sources, and their time bars will display in Time Bar
area. Your playback operations and search will be based on these selected channels.
Meanwhile, you may change the layout styles from Layout Selection Bar on the title bar.
Remove Unwanted Channels
You will only need the desired channels to be kept in Display area, as you don’t want too
many unnecessary results after you perform a search.
To remove a channel from Display area, you may place your cursor over the channel, and
right-click the mouse and then right-click the menu that provides “Remove”, “Export Video”
and “Snapshot” for a single channel.
The view of a map channel will not be recorded; therefore, it has no time bar or
recordings for playback.
To Next Page
Loading...
Need help?
General
