Planet WDAP-C1800AX User Manual

User Manual of WDAP-C1800AX &WDAP-1800AX
- 87 -
Step 1. Use static IP in the PCs that are connected with AP-1(Site-1) and AP-2(Site-2). In this case,
Site-1 is “192.168.1.100”, and Site-2 is “192.168.1.200”.
Step 2. In AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP
is changed to 192.168.1.252.
Step 3. In AP-1, go to “Wizard” to configure it to AP Mode. In AP-2, configure it to Repeater Mode.
AP-1

Planet WDAP-C1800AX Specifications

General

Brand	Planet
Model	WDAP-C1800AX
Category	Wireless Access Point
Language	English