Planet WDAP-C1800AX User Manual

User Manual of WDAP-C1800AX &WDAP-1800AX
- 49 -
4.3.4 IP Filtering
IP Filtering is used to deny LAN users from accessing the public IP address on internet as shown in
Figure 4-40. To begin blocking access to an IP address, enable IP Filtering and enter the IP address of
the web site you wish to block.
Figure 4-40: IP Filtering
Object Description
IP Filtering
Set the function as enable or disable.
Add IP Filtering Rule
Go to the Add Filtering Rule page to add a new rule.
Figure 4-41: IP Filter Rule Setting
Object Description
Enable
Set the rule as enable or disable.
Type
Set the type as IPv4 or IPv6
Source IP Address
Input the IP address of LAN user (such as PC or laptop) which you
want to control.

Planet WDAP-C1800AX Specifications

General

Brand	Planet
Model	WDAP-C1800AX
Category	Wireless Access Point
Language	English