User Manual of WDAP-C1800AX &WDAP-1800AX
- 41 -
Figure 4-35: DHCP
Object Description
DHCP Service
By default, the DHCP Server is enabled, meaning the router will
assign IP addresses to the DHCP clients automatically.
If user needs to disable the function, please set it as disable.
Start IP Address
By default, the start IP address is 192.168.1.100.
Please do not set it to the same IP address of the router.
Maximum DHCP Users
By default, the maximum DHCP users are 101, meaning the router
will provide DHCP client with IP address from 192.168.1.100 to
192.168.1.200 when the start IP address is 192.168.1.100.
DNS Server
By default, it is set as Automatically, and the DNS server is the
router’s LAN IP address.
If user needs to use specific DNS server, please set it as Manually,
and then input a specific DNS server.
Primary/Secondary DNS
Server
Input a specific DNS server.
WINS
Input a WINS server if needed.
Lease Time
Set the time for using one assigned IP. After the lease time, the
DHCP client will need to get new IP addresses from the router.
Default is 1440 minutes.
Domain Name
Input a domain name for the router.
To Next Page
Loading...
Need help?
General
