EasyManua.ls Logo

Planet WGSW-24040HP4 - Ip Address Dhcp; Ip Address Dhcp Fallback

Planet WGSW-24040HP4
433 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Command Guide
-174-
Example:
To configure IP address mode (192.168.1.10/24) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address 192.168.1.10 255.255.255.0
4.2.66.5 ip address dhcp
Command:
ip address dhcp
ip Interface Internet Protocol config commands
address Address configuration
dhcp Enable DHCP
Default:
None
Usage Guide:
To configure IP address mode for specific VLAN
Example:
To configure IP address mode (DHCP) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address dhcp
4.2.66.6 ip address dhcp fallback
Command:
ip address dhcp fallback <ipv4_addr> <ipv4_netmask>
ip Interface Internet Protocol config commands
address Address configuration
dhcp Enable DHCP
<ipv4_addr> DHCP fallback address
<ipv4_netmask> DHCP fallback netmask
Default:
None
Usage Guide:

Table of Contents

Other manuals for Planet WGSW-24040HP4

Related product manuals