Planet WGSW-24040HP4 - Show Ipv6 Route

Command Guide
-385-
Example:
To display the IPv6 neighbor information.
Switch # show ipv6 neighbor
2001::7766 via VLAN1: 00-30-4F-00-99-00 Permanent/REACHABLE
fe80::201:c1ff:fe00:9900 via VLAN1: 00-30-4F-00-99-00 Permanent/REACHABLE
4.21.57 show ipv6 route
Command:
show ipv6 route [ interface vlan <vlan_list> ]
show Show running system information
ipv6 IPv6 configuration commands
route IPv6 routes
interface Select an interface to configure
vlan VLAN of IPv6 interface
Default:
N/A
Usage Guide:
To display the IPv6 Routing table.
Example:
To display the IPv6 Routing table.
Switch # show ipv6 route
::1/128 via ::1 <UP HOST>
2001::/64 via VLAN1 <UP HW_RT>
2001::7766/128 via 1:c100:9900:: <UP HOST>
2002::/64 via 2001::7788 <UP GATEWAY HW_RT>