Planet WGSW-24040HP4 - Lldp Holdtime; Lldp Med Datum

Command Guide
-230-
4.2.104 lldp holdtime
Command:
lldp holdtime <2-10>
lldp LLDP configurations.
holdtime Sets LLDP hold time (The neighbor switch will discarded the LLDP information after "hold time" multiplied
with "timer" seconds ).
<2-10> 2-10 seconds
Default:
4
Usage Guide:
To enable LLDP hold time
Example:
To enable LLDP hold time (5)
Switch# configure terminal
Switch (config)# lldp holdtime 5
4.2.105 lldp med datum
Command:
lldp med datum nad83-mllw | nad83-navd88 | wgs84
lldp LLDP configurations.
med Media Endpoint Discovery
datum Datum (geodetic system) type
nad83-mllw Mean lower low water datum 1983
nad83-navd88 North American vertical datum 1983
wgs84 World Geodetic System 1984
Default:
WGS84
Usage Guide:
To configure Datum type of LLDP
Example:
To configure Datum type (nad83-mllw) of LLDP