Planet WGSW-24040HP4 - Domain-Name

Command Guide
-195-
4.2.73.7 do
Command:
do < exec commands >
do To run exec commands in config mode
Default:
N/A
Usage Guide:
To run exec commands
Example:
To run “show aaa”.
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.73.8 domain-name
Command:
domain-name <word128>
domain-name Domain name
<word128> Domain name
Default:
None
Usage Guide:
To configure Domain Name of DHCP Server
Example:
To configure Domain Name (planet.com) of DHCP Server for pool “planetbestswitch”
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# domain-name planet.com