Planet WGSW-24040HP4 - Netbios-Node-Type; Netbios-Scope

Command Guide
-199-
4.2.73.15 netbios-node-type
Command:
netbios-node-type b-node | h-node | m-node | p-node
netbios-node-type NetBIOS node type
b-node Broadcast node
h-node Hybrid node
m-node Mixed node
p-node Peer-to-peer node
Default:
None
Usage Guide:
To configure NetBIOS node type of DHCP Server.
Example:
To configure NetBIOS node type (B-node) of DHCP Server for pool “planetbestswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# netbios-node-type b-node
4.2.73.16 netbios-scope
Command:
netbios-scope <LINE>
netbios-scope NetBIOS scope
<LINE> Netbios scope identifier, in 128 characters
Default:
None
Usage Guide:
To configure NetBIOS scope of DHCP Server.
Example:
To configure NetBIOS scope (planet) of DHCP Server for pool “planetbestswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)#
netbios-scope planet