Planet WGSW-24040HP4 - Reboot-Only; Port-Security

Command Guide
-277-
4.2.177.6 reboot-only
Command:
reboot-only { Mon | Tue | Wed | Thu | Fri | Sat | Sun } <reboot_h> <reboot_m>
reboot-only To create a periodic mode time-range for the PoE time-range of the switch.
Fri Periodic Mode, with Friday.
Mon Periodic Mode, with Monday.
Sat Periodic Mode, with Saturday.
Sun Periodic Mode, with Sunday.
Thu Periodic Mode, with Thursday.
Tue Periodic Mode, with Tuesday.
Wed Periodic Mode, with Wednesday.
< reboot_h: 0-23> <0-23> reboot hour
< reboot_m:0-59> <0-59> reboot minute
Default:
N/A
Usage Guide:
To configure the Power Over Ethernet Reboot Schedule for specific profile.
Example:
To configure the Power Over Ethernet Reboot Schedule (below table) for specific profile.
Switch# configure terminal
Switch (config)# poe-time-range profile1
Switch (config-poe-time-range)# reboot Mon 0 0
4.2.178 port-security
Command:
port-security
port-security Enable/disable port security globally
Default:
Disabled