Planet WGSW-24040HP4 - Mep <Instance> Lt

Command Guide
-251-
Switch# configure terminal
Switch (config)# mep 2 lm 5 uni flr 4
4.2.138 mep <Instance> lt
Command:
mep <Instance> lt <prio> { { mep-id <mepid> } | { mac <mac> } } ttl <ttl>
mep Maintenance Entity Point
<Instance> The MEP instance number.
lt Link Trace
<Prio : 0-7> Priority in case of tagged OAM. In the EVC domain this is the COS-ID.
mac Link Trace target unicast MAC to be used in case of LT against MIP.
<Mac : mac_addr> Link Trace target unicast MAC value.
mep-id Peer MEP-ID for Link Trace target unicast MAC. The MAC is taken from peer MEP MAC database.
<Mepid : uint> Peer MEP-ID value.
ttl Time To Live.
<Ttl : uint> Time To Live value
Default:
Usage Guide:
To configure Link Trace of MEP.
Example:
To configure Link Trace of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 lt 4 mac 11-3A-15-A3-53-44