Planet WGSW-24040HP4 - System Contact; System Log Server Address

User’s Manual of WGSW-20160HP/WGSW-24040HP series
362
System Contact
Description:
Set or show the system contact.
Syntax:
System Contact [<contact>]
Parameters:
<contact>: System contact string. (1-255)
Use "" to clear the string
In CLI, No blank or space characters are permitted as part of a contact.
Default Setting:
empty
System Log Server Address
Description:
Show or set the system log server address.
Syntax:
System Log Server Address [<ip_addr_string>]
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
Default Setting:
empty