Planet WGSW-24040HP4 - STP Port Autoedge; STP Port P2 P

User’s Manual of WGSW-20160HP/WGSW-24040HP series
455
STP Port AutoEdge
Description:
Set or show the STP autoEdge port parameter.
Syntax:
STP Port AutoEdge [<stp_port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
Enable : Enable MSTP autoEdge
Disable : Disable MSTP autoEdge
Default:
enable
STP Port P2P
Description:
Set or show the STP point2point port parameter.
Syntax:
STP Port P2P [<stp_port_list>] [enable|disable|auto]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable MSTP point2point
disable : Disable MSTP point2point
auto : Automatic MSTP point2point detection
Default:
auto