Planet WGSW-24040HP4 - Link Aggregation Control Protocol Command; LACP Configuration; LACP Mode

User’s Manual of WGSW-20160HP/WGSW-24040HP series
461
6.10 Link Aggregation Control Protocol Command
LACP Configuration
Description:
Show LACP configuration.
Syntax:
LACP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
LACP Mode
Description:
Set or show LACP mode.
Syntax:
LACP Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable LACP protocol
disable: Disable LACP protocol
(default: Show LACP mode)
Default Setting:
disable