Planet WGSW-24040HP4 - MAC Address Table Command; MAC Configuration; MAC Add; MAC Delete

User’s Manual of WGSW-20160HP/WGSW-24040HP series
378
6.4 MAC Address Table Command
MAC Configuration
Description:
Show MAC address table configuration.
Syntax:
MAC Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
MAC Add
Description:
Add MAC address table entry.
Syntax:
MAC Add <mac_addr> <port_list> [<vid>]
Parameters:
<mac_addr> : MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
<port_list>: Port list or 'all' or 'none'
<vid> : VLAN ID (1-4095), default: 1
MAC Delete
Description:
Delete MAC address entry.
Syntax:
MAC Delete <mac_addr> [<vid>]
Parameters:
<mac_addr>: MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
<vid> : VLAN ID (1-4095), default: 1