Planet WGSW-24040HP4 - Poe Command; Poe Configuration; Poe Mode; AF;AT Mode

User’s Manual of WGSW-20160HP/WGSW-24040HP series
474
6.13 PoE Command
PoE Configuration
Description:
Show PoE configuration.
Syntax:
PoE Configuration
PoE Mode
Description:
Set or show the PoE mode.
Syntax:
PoE Mode [<port_list>] [enable|disable] [af|at]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enables PoE
disable : Disable PoE
(default: Show PoE's mode)
Default Setting:
enable
AF/AT Mode
Description:
Allows user to set up 802.3af (type1) or 802.3at (type2) mode to per port.
Syntax:
PoE mode [<port_list>] [af|at]
Parameters:
<port_list>: Port list or 'all', default: All ports
af : IEEE 802.3af mode
at : IEEE 802.3at mode