Planet WGSW-24040HP4 - PVLAN Lookup; PVLAN Isolate

User’s Manual of WGSW-20160HP/WGSW-24040HP series
392
PVLAN Lookup
Description:
Lookup Private VLAN entry.
Syntax:
PVLAN Lookup [<pvlan_id>]
Parameters:
<pvlan_id>: Private VLAN ID, default: Show all PVLANs. The allowed range for a Private VLAN ID is the same as the
switch port number range.
PVLAN Isolate
Description:
Set or show the port isolation mode.
Syntax:
PVLAN Isolate [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port isolation
disable : Disable port isolation
(default: Show port isolation port list)
Default Setting:
disable