User Manual of WRE-1200
14
3.1 Repeater Mode
In the repeater mode, the WRE-1200 can extend your wireless signal and coverage, and help you to solve
wireless dead zone problem.
Operation Mode Switch - Repeater Mode
Typical Application
For the first-time setup and easy installation, you can move this device close to the Wireless Broadband
Router or Access Point you wish to connect to. After the installation is done and wireless connection is
built, you can move this repeater device to the place you wish to use.
Figure 3-1 WRE-1200 Repeater Mode
To Next Page
