EasyManua.ls Logo

Platinum Access Systems ACTP715 - Important Safety Instructions

Platinum Access Systems ACTP715
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SUPPORT: (909) 259-6001
ACTP715
5
Important Safety Instructions
WARNING – To reduce the risk of injury or death:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Never let children operate or play with gate controls. Keep the remote control away from children.
3. Always keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE
MOVING GATE.
4. Test the gate operator monthly. The gate MUST reverse on contact with a rigid object or stop when an object
activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate operator.
Failure to adjust and retest the gate operator properly can increase the risk of injury or death.
5. Use the emergency release only when the gate is not moving.
.((3*$7(63523(5/<0$,17$,1('5HDGWKHRZQHU¶VPDQXDO+DYHDTXDOL¿HGVHUYLFHSHUVRQPDNH
repairs to gate hardware.
7. The entrance is for vehicles only. Pedestrians must use separate entrance.
8. SAVE THESE INSTRUCTIONS
Maximum Gate Weight: 700 lbs.
Maximum Gate Length: 15 feet
Opening Time: 90° opening in 21-25 seconds
Maximum Opening Angle: 120°
Power Requirements: 120 VAC Single Phase at 2 Amps or 220 VAC Single Phase at 1 Amp
Main Power: Power Input: 100-240 VAC
Select 115 /230 VAC Single Phase
Built-in 24VDC battery backup (7AmpHr 12VDC x 2)
Operating Temperature: -20°C (-4°F) to 70°C (158°F)
Arm Weight: 40 lbs.
Arm Dimensions:
SPECIFICATIONS
41 (1040 mm)
19
11
/16 (500 mm)
(120 mm)
4
23
/
32
(100 mm)
3
15
/
16
ACTP715 Manual_Layout 1 11/4/2014 3:53 PM Page 7