PleasureCraft Engine Group 5.0L User Manual

6.0/8.1L Electronic Ignition 4B - 17
MEFI 4 - PCM
Install or Connect
Important
• If installing a new knock sensor, be sure to replace
with an identical part number.
• When installing knock sensor, be sure to install in the
same location removed from.
1. Knock sensors into engine block. Be sure threads are
clean. Torque to 20 N•m (15 lb ft).
4. Remove the knock sensors.
2.
Connect the knock sensor electrical connectors.
3. Push down on the rubber covers.
4. Install the intake manifold. Refer to Intake Manifold
Replacement in Engine Mechanical - 6.0L.
832149
309864
309864

PleasureCraft Engine Group 5.0L Specifications

General

Brand	PleasureCraft Engine Group
Model	5.0L
Category	Engine
Language	English